Teledyne TapTone T550 Brochure_2021Brochure/Catalog
PRO Series Brochure thumbnailTapTone PRO Series Brochure_2021Brochure/Catalog
Overview brochure thumbnailOverview BrochureBrochure/Catalog
/resources/PublishingImages/vol2no8.jpgVol 2 No 8 - Cooker Protection - Seal Integrity, Vacuum Loss, and Fill Level Detection in Steel CansApplication Note
/resources/PublishingImages/vol3no8.jpgVol 3 No 8 - Identifying Pressure Defects in LN2 Dosed Beverage CansApplication Note
http://taptone.azure.tdystaging.com/resources/PublishingImages/Vol-12-No-3.jpgVol 12 No 3 Fill Level and Defects in Craft Breweries Part 2Application Note

 Related Products


Vacuum inspection on metal cans with sanitary or pull tab ends Pressure inspection on carbonated or LN2 dosed beverage cans Flat sour detection Cooker protection Missing foil seals





Up to 2,000 containers per minute


12 VDC supplied by user interface


Stainless steel, N​EMA 4X, IP65

Wash Down:  Low-pressure water


Conveyor mount or RTV pole​


Proximity Technology

Proximity technology measures pressure or vacuum in containers with metal closures by measuring the lid deflection. The sensor produces a continuous magnetic field that monitors the distance between the sensor and the metal lid. The continuous signal is digitally sampled to produce a merit value of the lid profile. The profile value is then compared to user set limits. Containers with lid deflection outside these limits are rejected.

Available with conveyor mount or on an adjustable, floor mounted RTV pole.

This sensor requires a User Interface for operation. The proximity sensor is compatible with the T550 and PRO Series user interfaces.

Proximity Sensor

  • Non-contact inspection
  • Up to 2000 containers per minute
  • Floor and conveyor mount options
  • Can be added to an existing TapTone system
  • User Interface Required: Can be used with a T550 or PRO Series interface

Contact Us